AC180P

1. Can be used alone, AC180P has internal battery
2. The AC180P has no capacity expansion function, and does not support direct capacity expansion with B80P,B300, and B230 battery packs. The B80P,B300, and B230 can only be expanded by connecting to the AC180P in charging bank mode

Yes, the default UPS mode keeps the SOC at 100% all the time. It is mainly used as the backup system

Within 20ms.

No, please put it in a dry place, AC180P operating humidity range of 10%~90%

Only Bluetooth connected apps are supported

The AC180P can carry pure resistive loads up to 2700W when turned on in Hercules mode, but two conditions need to be met
1. The load must be pure resistive load
2. Use it off-network

Power saving mode: After the function is turned on, the machine AC or DC does not carry the device or the load power is too small, the machine will automatically turn off the AC or DC after a period of time, in order to reduce the power consumption of the machine and save power, the specific power and time can be set in the APP

When the weak power grid/generator of the customer's home charges our machine, because the AC output voltage or frequency of the weak power grid/generator is unstable, it is not possible to stably charge our machine, then the grid adaptive mode can be turned on to adapt to the customer's grid/generator

You can use the AC180P to charge your devices in cold weather, but please avoid recharging it below freezing. The operating temperature for AC180P is:
Charging: 0℃~40℃ / 32℉~104℉
Discharging: -20~40℃ / -4~104℉

1. When SOC drops to 5%, charge the product immediately.
2. Before storing the product, please charge it to 60% SOC to maintain the best condition. In addition, turn off the power to the device and disconnect all electrical connections.
3. Store the product in a cool, dry place away from flammable or combustible materials and gases.
4. The plant can be safely stored in a temperature range of -20°C to 45°C (-4°F to 113°F). However, if the storage time is longer than one month, it is recommended to keep the ideal storage temperature around 30°C (86°F).
5. Complete the cycle of the product every 3 months to maintain the health of the battery.

1. The output specifications, voltage and frequency of the generator need to be within the input range of the adapter. If it is unstable, you can open the grid adaptive mode in the APP for adaptation
2. Whether the maximum output power of the generator meets the maximum AC input power of our machine, if not, our machine can adjust the charging mode to reduce the maximum AC input power
3. The output of the generator is sine wave

1.AC180P can be connected to 1-2*PV120,1-2*PV200, 1*PV350 or 1*PV420
2. It is best to connect all solar panels in series, because the AC180P PV input is a wide voltage range of 12V~60V, and the maximum input current is only 10A, the series voltage increases, and the flow current increases, so the series efficiency is higher, pay attention to the different types of solar panels can not be mixed connection, otherwise it will affect the efficiency, and the solar panel will be damaged for a long time
3. Solar input current can exceed 10A, our machine will limit the current, but beyond that is equivalent to a waste, the current can exceed, the voltage can not exceed
4. Solar input power can exceed 500 watts, as long as the total PV VOC does not exceed 60V

Yes, as long as the solar panel specifications are within the following range:
1. Total VOC: 12V~60V
2. Total power: 500W Max
3. With MC4 connector

Yes, but please note that your solar roof must meet the following conditions:
1. Total VOC 12V~60V
2. Connect the MC4 connector
3. Do you have a micro inverter? The micro-inverter cannot charge the AC180P directly. The AC180P can only be charged by the AC wall charge

cannot

Not recommended, because the wind turbine due to the unstable air volume, the wind turbine output voltage and frequency will be unstable, can not be stabilized in the range of our machine input, directly to our machine charging may be intermittent, or even unable to charge

AC/AC+PV Maximum charging power:
1. Standard mode 1000W
2. Silent mode 500W
3. Fast charge mode 1440W
PV maximum charging power;
Standard mode, silent mode, Fast charge mode 500W

The AC180P supports AC+DC dual charging, but the DC has only one input port, so it only supports AC+ solar panel charging or AC+ car charging at the same time

Charging time (estimated) = (Capacity/Charging power) + Trickle charging time
Trickle charging time for Bluetti power station is typically 0.5~1 hours

Support simultaneous charging and discharging

Yes, the DC input voltage range of AC180P is 12V~60V, the maximum output voltage of T200S is 25.2V, and the maximum output voltage of T500 is 58.8V, all in the DC input voltage range of AC180P

Not recommended, D050S and AC180P DC input range is the same, the main role of D050S is to regulate the voltage, not to increase the charging power, increase the D050S will also increase the loss.
D050S is mainly used to charge AC200MAX, AC200P,B230,B300 and B300S.

may
1. If the lead-acid battery is equipped with an AC-DC adapter, the battery can be charged from the machine AC output outlet
2. You can also charge the battery directly from the DC 12V output of the machine.Connect wire purchase link

Yes, as long as the total load power does not exceed the maximum output power of the machine

The main differences are as follows
1. Battery capacity: AC180P capacity 1440Wh, and AC180T can take out the internal battery pack, capacity 716.8Wh~1433... 6Wh
2. AC180T is mainly used with refrigerator P045D

Do not. Long-term placement may loosen the internal structure. Upright placement is recommended.

Runtime = Capacity × DoD × η ÷ (load power+self-consumption power)
Note:
1) DoD refers to the Depth of Discharge, η is the local inverter efficiency. DoD=90%, η=85%.
2) The above data is for reference ONLY.